Category Archives: Fusion 360

R/C Helicopter Design Update

As you may be aware I have been attempting to model an R/C Helicopter loosely based on the Outrage Velocity 50 Model.  I started this project using Shaper3D on an iPad Pro.  However, I scrapped that version as I sold off my iPad Pro.

I build a custom desktop with the intent on modeling often.  I chose Fusion 360 as the software.  Below are some renderings of the work I have been doing on the R/C Helicopter.  Most of this work has been over the last few nights after work.

InMoov – Fusion 360 Renders

InMoov was created using SketchUp, however I am not familiar with using this application and I seem to have difficulties when I try to use it.

Over the past couple weeks I have been using a few programs to bring InMoov to Fusion 360 mostly for assembly purposes.  Here are a couple renders showing the progress.


NOTE:  I am not the creator of this robot.  The InMoov Robot was created by Gael Langevin, you can read more about it here:

Humanoid Robot – F360 (Post 12)

Here we have the mount for the Raspberry Pi 3 computer.  This mount as you see it is a work in progress and may change.  The thought here is to have a screwless design as well as have lots of open space to help keep it cool.

The Raspberry Pi model is not mine, it was shared on GrabCad by Mechatronics Art.  You can download it here.

Goto Page 11 | Goto Page 13

Humanoid Robot – F360 (Post 9)

Now back to modeling.  Here we have the top hip plate modeled.  We also have the battery modeled and the back plate modeled.  The backplate is the assembly point for the upper and lower plates.  I thought it would be a good place to add some text.

I have decided to name this robot RH-H1.  The RH is for Robotics Hobbyist, the H is for Humanoid and the 1 is because this is the 1st revision or first Humanoid I have built.

He we also have it assembled onto the lower half of the robot.

Goto Page 8 | Goto Page 10

Humanoid Robot – F360 (Post 6)

Here we have the upper hip plate modeled and in place.  We also have a rough model to simulate the battery size and placement.  The battery was modeled to help visualize placement and clearance.  I still need to come up with a mounting solution for the battery, this means that some of the parts modeled may change at some point.

Goto Post 5 | Goto Post 7